Cylinder Hones, Disassembly Benches, Nut Busters®, Shaft Polishers, Tube Washers, and Pump Testers
PRODUCTS
ABOUT US
FEATURES
Click on picture for greater detail
 |
A
high volume honing oil pump system to assure a continuous flow of
oil for cutting and flushing during the honing process. A simple and
effective settling system removes slurry from the honing oil as it
returns to the main tank. Two rolling shrouds are provided to contain the honing oils and insure a clean splash free honing system. These hoods roll the length of the hone and/or can be lifted off to facilitate the installation and removal of the cylinder free of obstruction. |
 |
The hydraulic power unit consists of a variable displacement pressure compensated pump mounted to a “C” face 7-1/2hp. TEFC, 3 phase, motor with a 40 gal. reservoir, manifold and two directional valves. This unit drives the two hydraulic motors used for head traversing and rotation and is cooled with a air to oil cooler. Both the feeds and speeds are completely variable by use of flow control valves on each circuit. |
 |
The
horizontal slide is composed of four (4) Teflon lined linear
bearings running on two (2) 1½” turned ground and polished rails. A rack and gear driven by a hydraulic motor runs the length of the honing section. This insures a rugged no lash horizontal drive. |
 |
The honing head consists of a linear bearing slide with a vertical adjustment of 17in. and a hydraulic drive generator motor that will accept any standard honing tooling. |
 |
The electrical package incorporates a programmable controller, transformer, limit switches, motor starter and push buttons in a functional and conveniently located enclosure. |
Stand out from your competition by having certified people working for you. Check out the Fluid Power Society Web site for information on certification for Hydraulic Specialists, Hydraulic Mechanics and Hydraulic Technicians.
Beginning and Intermediate Fluid Power Training
Fluid power courses for IFPS Certification or customized classes for your companies needs. Contact Leslie's Contract Services at sales@fi2m.net or call 414-617-4870 for information
The Equipment Service Association is an association of companies successfully engaged in the sales and service of hydraulically, pneumatically or electrically operated tools, components, and equipment.
Check them out at www.2esa.org
HydraulicRepairShops.com is the place to find hydraulic repair shops and hydraulic repair parts suppliers. Find shops that repair hydraulic cylinders, hydraulic pumps, hydraulic presses, hydraulic lifts, hydraulic motors, hydraulic power units, hydraulic systems, and other hydraulic components. Add Your Hydraulic Repair Shop to the list of companies on this site for a small fee.